Skoči na vsebino

Blajerca


zilko

Priporočene objave

Polini Corsa - gus ocena 5/5: 185eur

With the Corsa, Polini offers a Racing version of the 70cc shower cylinder. Through somewhat longer tax times, larger canal cross-sections, polished outlet and higher condensation, the achievement of this cast iron-cylinder is raised on up to 13 HP. The cylinder should be gone at least with a 17.5 mm carburetor to guarantee around the internal cooling. Correctly is voted also this cylinder very durable. Speeds of 120 km/h are with the corresponding components (Racing-exhaust, carburetor, Vario and long transmission) no problem. The Kit is delivered complete with head, sealing and piston. An achievement curve one very well voted of Corsa-cylinder finds its under the menu point "achievement curve" under Scooter-Attack Demonstrator.

Attention in the new Piaggio/Gilera motors (HYPER 2), the cylinder foot must be turned off let mounted will can 1.5 mm in the diameter therewith the cylinder! zB. D. N. A

Airsal T6 - alu ocena 3/5: 150eur

Airsal offers aluminum-Racing-cylinder to the Top-price. Airsal, that pour among other things also the cylinders for Metrakit, offer a price with the T6 hervorrangenden cylinder achievement moderate. Double outlet with middle footpath, as well as selbstzentrierende heads in the water-cooled models its large advantages are. We ourselves tested the durability on characteristic motors, a trip from Saarbrücken to Dusseldorf (ca. 400 km) the cylinder overcame without problems. Little weak point, the piston shirt is somewhat scharfkantig and should become with fine bow paper after working. Achievement ca. 10-13 HP.

MHR Replica - alu ocena 5/5: 185eur

A more very more high-performance is the MHR Replika of Malossi and nevertheless everyday life suitable cylinder out of aluminum with a high festivals chrome/Nicasil coated course. Advantages of aluminum cylinders are the good warmth derivation of the material. With the MHR Replica cylinder can be got up to 12 HP out of the motor. The cylinder should be gone to guarantee unconditionally (min.17,5mm with a larger carburetor) around the internal cooling and to use the achievement potential of the cylinder full. The Kit is delivered completely.

tole je mal bl "tko" preveden tko da se opravicujem za napake

Povezava do komentarja
Delite na drugih straneh

evo se nekej zanimivga sm najdu

Dyno-printouts:

Piaggio Typhoon/TPH Polini Corsa kit, 21mm carb, Evolution manifold, Polini crank, Polini Variator, Polini SpeedDrive, Polini Speed-Clutch, tall primary gear, Polini ignition, Polini AirBox, Polini exhaust ForRace

12,2 Bhp (as measured on the rear wheel,-ca.15 Hp as measured on the crankshaft), 120Kph+

Polini Corsa kit- 44.225 SIT

21mm carb- 20.090 SIT

Evolution manifold- 12.768 SIT

Polini crank- 47.056 SIT

Polini Variator- 17.663 SIT

Polini SpeedDrive- 12.270 SIT

Polini Speed-Clutch- 19.685 SIT

tall primary gear- 19.820 SIT

Polini ignition- 19.443 SIT

Polini AirBox- (filter evolution) 8.000sit

Polini exhaust ForRace- 61.483 SIT

skupaj cca 260.000 ce zacnes iz nule

Povezava do komentarja
Delite na drugih straneh

useen čeb dau namest corse ene 15k vec pa bi mu MHR team kma okol 20KM :)

HEBO Manston - Racing II to je kit pa ko se se predela uuuuuuuu ni bolsega :OK: cena pa 318evrov

Popravljeno . Popravil _Roba_
Povezava do komentarja
Delite na drugih straneh

Malossi MHR Team ocena 5/5 cena 342eur:

The originals teams cylinder of the Malossi Cup. Absolute High-end-Tuning, with divided head. Crank shaft can be gone only in connection with the Malossi crank shaft or the Malossi MHR teams.

Hebo Manston Racing II ocena 5/5 cena 318eur:

New revised version 2003! Next to the Malossi team the probably strongest 70cc cylinder on the market. 6 powerful over currents a wide, divided outlet and gigantic canals. The cylinder is delivered with hochverdichtetem copper-head. Meherer sealings in different strengths lie to adapt in around the tax times and Quetschkante. Divided head to better Umspülung is obvious in Hebo Manston. Achievement 18-23 HP, according to related components.

Za oba cilindra je obvezno menjati gred, vplinjac 19-25mm, lezaje in cel sklop over-range s sklopko+pokrovom, prenosi naj bi bli pa 20-30% daljsi za te cilindre (tko pise v enmu katalogu)

Povezava do komentarja
Delite na drugih straneh

ja mas prov, pa ne zdi se mi lih primeren za cestno uporabo, saj je poraba ogroooooomna, pa intervali med menjavami batov so tut zelo kratki proti ostalim kitom.

Povezava do komentarja
Delite na drugih straneh

bom vidu jutri kako bo stanje (miklavž) pa če bo prnesu dosti se lahko še zmenima za fergija,ti bom 15. tega poslal pm pa bom povedal kak je ..

Povezava do komentarja
Delite na drugih straneh

a ma kdo ze ksne izkusnje s temu airsalom? tko da ga ma ze dl casa notr, pa da mu stevec dela :D

Jaz sem jih mel pa so bile dobre :) Samo sem ga ven dal nevem zakaj :wacko:

Povezava do komentarja
Delite na drugih straneh

Sem nov na temu forumu pa sem mislu da bom v tej temi najdu vsaj kšn naslov od trgovine kje bi se dal kej tazga kupt. No uglavnm imam yamaho aerox in sm se odloču da bom kupu kit (polini). Zdej pa prosm če bi loh kdo dal kšn naslov (telefonsko) od trgovine v Italiji (Trst, Palmanova, Gorica). Bil sm pa lih učeri u italiji (palmanova) in sm za brezveze hodu k nism nč najdu. Pa še zanima me kašn frgazar priporočate (17.5, 19, 21). Pa hvala za odgovore.

Povezava do komentarja
Delite na drugih straneh

glede polinija ga lahko dobis tudi v sloveniji, res da nekoliko drazje. zdej mas 3 moznosti: polini sport (cca 8-10 konjev), polini corsa (cca 13konjev) in polini alu. cca 12 konjev. za polini sport je priporocljivo kupiti 17,5mm (lahko tudi vec - odvisno kaksen izpuh mas), za polini corsa in alu vsaj 17,5mm, lahko pa tudi 19 ali 21.

Povezava do komentarja
Delite na drugih straneh

Sej kit vem ker bom uzel in sicer imam eno cifro (kataloška) 166.0083/R, to je 11,7hp. Glede nakupa se mi zdi da je u kle mal predrago vse skup in zato bi raj kupu u Italiji in rabm en naslov.

Povezava do komentarja
Delite na drugih straneh

/R ti predlagam da vzames 19mm ali pa 21mm, poraba bo res velika, pospeski pa tudi dobri, splaca se ti pa vzeti tut dobr auspuh poleg tega kita (npr. polini for race)

Povezava do komentarja
Delite na drugih straneh

Ustvarite račun ali se prijavite za komentiranje

Za objavljanje se morate najprej registrirati

Ustvarite račun

Registrirajte se! To je zelo enostavno!

Registriraj nov račun

Prijava

Že imate račun? Prijavite se tukaj.

Vpišite se
  • Zadnji brskalci   0 članov

    • Noben registriran uporabnik, si ne ogleduje to stran.



×
×
  • Ustvari novo...

Pomembne informacije

Z uporabo te strani se strinjate z uporabo piškotkov in se strinjate s pravili o varovanju zasebnosti!